Facades, columns, feature walls; canopy / pergola, beam mount, facade wash
Linear Fixtures 2-pin connection Single Colour Wall Washer
WW-3000K-[W]-[V]-[L]MM (24V or 120V)
Built from high-quality aluminum profile and toughened glass with an anodized, corrosion-resistant shell. The 15° × 55° optic offers the most versatile wash.
Dimming options for the 24 VDC models. See the Dimming & Control tab for wiring and run lengths.

Specifications
Specifications from the DayTech LED cut sheet. Subject to change without notice.
| Part Number | Voltage | IP Rating | Colour | Length / Size | Power | Quote |
|---|---|---|---|---|---|---|
| WW-3000K-36W-24V-1218MM | 24 VDC | IP66 | 3000K | 1218 mm | 36 W | |
| WW-3000K-36W-24V-1002MM | 24 VDC | IP66 | 3000K | 1002 mm | 36 W | |
| WW-3000K-18W-24V-615MM | 24 VDC | IP66 | 3000K | 615 mm | 18 W | |
| WW-3000K-9W-24V-314MM | 24 VDC | IP66 | 3000K | 314 mm | 9 W | |
| WW-3000K-9W-24V-507MM | 24 VDC | IP66 | 3000K | 507 mm | 9 W | |
| WW-3000K-36W-120V-1218MM | 120V | IP66 | 3000K | 1218 mm | 36 W | |
| WW-3000K-36W-120V-1002MM | 120V | IP66 | 3000K | 1002 mm | 36 W | |
| WW-3000K-18W-120V-615MM | 120V | IP66 | 3000K | 615 mm | 18 W | |
| WW-3000K-9W-120V-314MM | 120V | IP66 | 3000K | 314 mm | 9 W | |
| WW-3000K-9W-120V-507MM | 120V | IP66 | 3000K | 507 mm | 9 W |
Three Ways to Dim the 24 V Wall Washer
The 24 VDC Single Colour Wall Washer can be dimmed three ways: with any dimmable 24 V driver, with the plug-and-play RM-RF-2.4G dimmer and its simple remote, or with an LED-DIM Driver + Dimmer Wall Switch. Each setup connects to the first fixture with the WW-3000K-INP-CBL input cable (2-pin female to bare wire), and the rest of the run daisy-chains fixture to fixture.
| Option | How It Dims | Best For |
|---|---|---|
| 1 · Dimmable 24 V Driver | Any dimmable 24 V driver: TRIAC / MLV, ELV or 0–10 V | Projects with a wall dimmer or a 0–10 V lighting control system |
| 2 · RM-RF-2.4G Plug & Play | 2.4 GHz RF dimmer on the low-voltage side, dimmed with a simple remote | Quick installs and retrofits with a non-dimmable 24 V driver |
| 3 · LED-DIM Driver + Dimmer Wall Switch | Driver and dimmer in one unit that fits a standard wall box | A clean wall-switch install for a shorter run |
Option 1 · Any Dimmable 24 V Driver
The wall washer works with any dimmable 24 V driver. DayTech options:
| Driver | Dimming | 24 V Sizes |
|---|---|---|
| EM-D Series Dimmable (Class 2) | TRIAC / MLV (leading edge) | 40, 60, 75, 96 W |
| 0–10V 4-in-1 Dimmable Driver | 0–10 V / 1–10 V / potentiometer / PWM | 30, 60, 96 W |
| 0–10V Dimmable Potted Drivers | 0–10 V | 40, 60, 90 W |
| Universal Dimming Multi-Channel (UNV-DIM) | 0–10 V / 1–10 V, ELV & MLV TRIAC | 2, 3 or 4 channels × 96 W |
| Phase-Dimmable High Power Drivers | TRIAC / phase-cut (ELV & MLV) | 150, 240, 320 W |
- Size the driver so the total wattage of the fixtures it feeds is no more than the driver's rating.
- Use a wall dimmer or control that matches the driver's dimming type.
- Drivers over 96 W are not Class 2 and must be installed by a Licensed Electrical Contractor.
Option 2 · Plug & Play with the RM-RF-2.4G
- 1Power
Use a non-dimmable 24 V driver sized for the fixtures on the run.
- 2Add the Dimmer
Connect the RM-RF-2.4G on the low-voltage side, between the driver's 24 V output and the WW-3000K-INP-CBL input cable, + to + and − to −.
- 3Dim with the Remote
Switch on and set the brightness with the simple RF remote.
Option 3 · LED-DIM Driver + Dimmer Wall Switch
Important: Use a single colour LED-DIM model only: LED-DIM-60W-24V, LED-DIM-60W-24V-WB, LED-DIM-96W-24V or LED-DIM-96W-24V-WB. The CCT / Dim-to-Warm models (-CCT) do not work with this fixture.
| LED-DIM Model | 1002 / 1218 mm (36 W) | 615 mm (18 W) | 314 / 507 mm (9 W) |
|---|---|---|---|
| 96 W (LED-DIM-96W-24V / -WB) | Max 2 | Max 5 | Max 10 |
| 60 W (LED-DIM-60W-24V / -WB) | Max 1 | Max 3 | Max 6 |
- Mixing lengths? Add up the fixture wattages and keep the total at or under 96 W (or 60 W).
- Wire the switch's single colour output, Red (V+) and Blue (V−), to the input cable's + and −.
- The -WB models add WiFi + Bluetooth app control. The switch fits a standard wall box and supports 3-way switching.
Max Fixtures per Power Connection
| Fixture | 24 VDC |
|---|---|
| 9 W (314 / 507 mm) | 14 |
| 18 W (615 mm) | 7 |
| 36 W (1002 / 1218 mm) | 4 |
- This is the most fixtures on one power connection, whichever option you use. Feed larger installations from additional supply points, and never exceed the driver or switch rating.
Before You Power Up
Important: These options are for the 24 VDC models. The 120 V version (on request only) runs on line voltage and does not use a 24 V driver or dimmer.
- Keep + to + and − to − from the driver to the first fixture.
- Seal the last connector in each run with the WW-3000K-EC end cap.
- Mains wiring to the driver or LED-DIM switch must be done by a qualified electrician to local code.
From the DayTech Single Colour Wall Washer, LED-DIM and driver cut sheets. Not sure which setup suits your project? Send us your layout and we'll put the parts list together.
Planning a Project with the Single Colour Wall Washer?
Tell us the lengths and layout and we'll quote the tape, channel, connectors and driver for each run.




