Single Colour Accessories Single Colour Accessories
Splice Connector · 8 mm / 10 mm
DT-SPLICE-8, DT-SPLICE-10
Joins two pieces of cut LED tape, strip to strip. Must match tape width. Works with COB reels, FL-300, FL-5730, FL-600 and FL-800 tape.
IP ratingIP20
Tape width8 mm / 10 mm
ConnectionStrip to strip
Strip width
Your Part NumberDT-SPLICE-8, DT-SPLICE-10
Specifications
Type
Splice connector
Connection
Strip to strip
Tape width
8 mm / 10 mm (must match tape width)
IP rating
IP20
Works with
DT-SPLICE-8: 300 Series, 600 Series, 160 Series COB, 320 Series COB, 320 COB 8 m IP67, 480 Series COB; DT-SPLICE-10: 800 Series, 5730 strip
Specifications from the DayTech LED cut sheet. Subject to change without notice.
| Part Number | Voltage | IP Rating | Colour | Strip Width | Power | Quote |
|---|---|---|---|---|---|---|
| DT-SPLICE-8 | IP20 | 8 mm | ||||
| DT-SPLICE-10 | IP20 | 10 mm |
Compatibility
Works with These Products
Planning a Project with the Splice Connector · 8 mm / 10 mm?
Tell us the lengths and layout and we'll quote the tape, channel, connectors and driver for each run.











