Single Colour Accessories Single Colour Accessories
DC Extension Cable
SL-EX-1M, SL-EX-2M
Male / female DC extension cable.
ConnectionMale / female DC
Lead length1 m / 2 m
Length
Your Part NumberSL-EX-1M, SL-EX-2M
How It Works
More Reach, No Splicing
The SL-EX male/female DC extension adds 1 m (3’3″) or 2 m (6’6″) of cable to a plug-in LED strip or COB tape installation, so the strip doesn’t have to sit next to the outlet. It plugs in anywhere along the DC side: between the plug-in adaptor and the strip, between the adaptor and a DC splitter, or on a single splitter output.
1 m / 2 m3’3″ / 6’6″
FemaleAccepts the DC plug
MalePlugs into the next part
Strip + COBSingle colour tape
The Installation Process
Where the Extension Fits
Installation
Four Steps
- Measure the gap. From the outlet (or splitter output) to the end of the strip; choose SL-EX-1M or SL-EX-2M to cover it.
- Fit a DC lead to the strip. Solder an NL-DCFEMALE-2M lead to the + and − pads at the end of the strip. Prefer not to solder? Fit a tape-to-wire lead or COB strip-to-wire splice to the strip and join its wires to the DC lead with an H-connector. Check your tape’s Compatible Accessories for the right width.
- Connect. Plug the adaptor (or splitter output) into the extension’s female end, and the extension’s male end into the strip’s DC lead.
- Power up and test. Plug the adaptor into the outlet and check the run lights evenly.
Important Notes
- Same power: the extension carries the adaptor’s output to the strip; it does not add any.
- Match the voltage: use 24V tape with a 24V adaptor or driver, and 12V tape with 12V.
- Polarity: always + to + and − to − when soldering or joining wires. The DC plugs only fit one way.
- Size the power: add up the wattage of every run (W/m × metres) and choose an adaptor or driver with about 20% headroom.
Quick Guide
Parts for This Set-Up
| Part | What It Does | Part Number |
|---|---|---|
| Plug-In Adaptor | Plugs into a standard outlet; DC plug output. 12V: 12, 36 or 60 W. 24V: 36, 60 or 96 W. | PS-…-12V / 24V |
| DC Extension Cable | Male / female extension, 1 m (3’3″) or 2 m (6’6″). | SL-EX-1M / SL-EX-2M |
| DC Splitter · 2-Way | 1 × DC jack input, 2 × DC plug outputs. | SL-SPL-2W |
| DC Splitter · 3-Way | 1 × DC jack input, 3 × DC plug outputs. | SL-SPL-3W |
| DC Splitter · 5-Way | 1 × DC jack input, 5 × DC plug outputs. | SL-SPL-5W |
| DC Lead · 2 m (female) | Soldered to the strip; accepts the DC plug from a splitter, extension or adaptor. | NL-DCFEMALE-2M |
| Tape-to-Wire Lead / COB Splice | No-solder option: connects a cut end of tape to bare wires. Match the tape width. | DT-100CM-8/10 · DT-SPLICE-8-COB-P |
Specifications
Type
DC extension cable
Connection
Male / female DC
Lead length
1 m (3'3") / 2 m (6'6")
Works with
300 Series, 300 Series Bendable, 600 Series, 800 Series, 160 Series COB, 320 Series COB, 320 Super Slim COB (5 mm), 320 COB 8 m IP67, 480 Series COB, 2835 Sauna & Steam, 2216 Sauna & Steam
Specifications from the DayTech LED cut sheet. Subject to change without notice.
| Part Number | Voltage | IP Rating | Colour | Length | Power | Quote |
|---|---|---|---|---|---|---|
| SL-EX-1M | 1 m (3'3") | |||||
| SL-EX-2M | 2 m (6'6") |
Compatibility
Works with These Products
300 Series LED StripSL-EX-1M, SL-EX-2M
300 Series Bendable LED TapeSL-EX-1M, SL-EX-2M
600 Series LED StripSL-EX-1M, SL-EX-2M
800 Series LED TapeSL-EX-1M, SL-EX-2M
160 Series COB TapeSL-EX-1M, SL-EX-2M
320 Series COB TapeSL-EX-1M, SL-EX-2M
320 Super Slim COB Tape (5 mm)SL-EX-1M, SL-EX-2M
320 Series COB Tape (8 m, IP67)SL-EX-1M, SL-EX-2M
480 Series COB TapeSL-EX-1M, SL-EX-2M
2835 Sauna & Steam LED TapeSL-EX-1M, SL-EX-2M
2216 Sauna & Steam Tape LightSL-EX-1M, SL-EX-2M
Planning a Project with the DC Extension Cable?
Tell us the lengths and layout and we'll quote the tape, channel, connectors and driver for each run.




