Pickup from our Mississauga warehouse · 5250 Satellite Drive, Unit 7 905-617-0298Cut Sheet LibraryCustomer Portal (Coming Soon)
Home / Products / Accessories / Single Colour Accessories / DC Extension Cable
DC Extension Cable Single Colour Accessories
Single Colour Accessories

DC Extension Cable

SL-EX-1M, SL-EX-2M

Male / female DC extension cable.

ConnectionMale / female DC
Lead length1 m / 2 m
Length
Your Part NumberSL-EX-1M, SL-EX-2M
Cut Sheet (PDF)
How It Works

More Reach, No Splicing

The SL-EX male/female DC extension adds 1 m (3’3″) or 2 m (6’6″) of cable to a plug-in LED strip or COB tape installation, so the strip doesn’t have to sit next to the outlet. It plugs in anywhere along the DC side: between the plug-in adaptor and the strip, between the adaptor and a DC splitter, or on a single splitter output.

EXTENSION · REACH A STRIP FURTHER FROM THE OUTLETPlug the extension between the adaptor and the strip lead when the outlet is out of reach.DC12V or 24VPLUG-IN ADAPTORPS · 12V or 24V models1 m or 2 mDC EXTENSION CABLESL-EX-1M / SL-EX-2MTHIS PARTDC FEMALE LEADNL-DCFEMALE-2MLED STRIP OR COB TAPE
Single run. Adaptor → SL-EX extension → DC female lead (NL-DCFEMALE-2M) soldered to the strip.
EXTENSION + SPLITTER · DIFFERENT DISTANCES FROM ONE ADAPTORUse an extension on any splitter output that needs to reach a run further away.DC12V or 24VPLUG-IN ADAPTORPS · 12V or 24V models1 → 2SPLITTERSL-SPL-2WSL-EX-1M / 2MNEAR RUNFAR RUNDC FEMALE LEADNL-DCFEMALE-2MLED STRIP OR COB TAPE
With a splitter. Extend only the output that needs to reach a run further away.
1 m / 2 m3’3″ / 6’6″
FemaleAccepts the DC plug
MalePlugs into the next part
Strip + COBSingle colour tape
The Installation Process

Where the Extension Fits

WHERE THIS PART FITS1 · POWERPlug-in adaptoror hard-wired driver+ NL-DCMALE-2M2 · EXTENDSL-EX-1M / 2Moptional · adds reach3 · SPLITSL-SPL-2W / 3W / 5Woptional · 2, 3 or 5 runs4 · CONNECTNL-DCFEMALE-2Msoldered to the strip5 · LIGHTLED strip or COB tapecut to length
Plug-in installation order: power → extend → split → connect → light.
Installation

Four Steps

  1. Measure the gap. From the outlet (or splitter output) to the end of the strip; choose SL-EX-1M or SL-EX-2M to cover it.
  2. Fit a DC lead to the strip. Solder an NL-DCFEMALE-2M lead to the + and − pads at the end of the strip. Prefer not to solder? Fit a tape-to-wire lead or COB strip-to-wire splice to the strip and join its wires to the DC lead with an H-connector. Check your tape’s Compatible Accessories for the right width.
  3. Connect. Plug the adaptor (or splitter output) into the extension’s female end, and the extension’s male end into the strip’s DC lead.
  4. Power up and test. Plug the adaptor into the outlet and check the run lights evenly.
Important Notes
  • Same power: the extension carries the adaptor’s output to the strip; it does not add any.
  • Match the voltage: use 24V tape with a 24V adaptor or driver, and 12V tape with 12V.
  • Polarity: always + to + and − to − when soldering or joining wires. The DC plugs only fit one way.
  • Size the power: add up the wattage of every run (W/m × metres) and choose an adaptor or driver with about 20% headroom.
Quick Guide

Parts for This Set-Up

Part What It Does Part Number
Plug-In Adaptor Plugs into a standard outlet; DC plug output. 12V: 12, 36 or 60 W. 24V: 36, 60 or 96 W. PS-…-12V / 24V
DC Extension Cable Male / female extension, 1 m (3’3″) or 2 m (6’6″). SL-EX-1M / SL-EX-2M
DC Splitter · 2-Way 1 × DC jack input, 2 × DC plug outputs. SL-SPL-2W
DC Splitter · 3-Way 1 × DC jack input, 3 × DC plug outputs. SL-SPL-3W
DC Splitter · 5-Way 1 × DC jack input, 5 × DC plug outputs. SL-SPL-5W
DC Lead · 2 m (female) Soldered to the strip; accepts the DC plug from a splitter, extension or adaptor. NL-DCFEMALE-2M
Tape-to-Wire Lead / COB Splice No-solder option: connects a cut end of tape to bare wires. Match the tape width. DT-100CM-8/10 · DT-SPLICE-8-COB-P

Specifications

Type
DC extension cable
Connection
Male / female DC

 

Lead length
1 m (3'3") / 2 m (6'6")
Works with
300 Series, 300 Series Bendable, 600 Series, 800 Series, 160 Series COB, 320 Series COB, 320 Super Slim COB (5 mm), 320 COB 8 m IP67, 480 Series COB, 2835 Sauna & Steam, 2216 Sauna & Steam

Specifications from the DayTech LED cut sheet. Subject to change without notice.

Planning a Project with the DC Extension Cable?

Tell us the lengths and layout and we'll quote the tape, channel, connectors and driver for each run.